Heating - Ventilating - Air Conditioning
Refrigeration and Process Control
+44 (0) 1282 433380
Industrial Technology
JET range
JET-40 to 120RF. One stage industry room thermostats with capillary system and outdoor sensor. For the control or supervision of temperatures in non-aggressive environments in the industrial sphere e.g for systems in greenhouses, sports halls, cold stores etc. The 110RF is particuarly suited for use as an outdoor thermostat. Setting ranges between -35 and 70 degrees C. 24-250V.
Industrial Technology
JMT range
JMT 212 to 411. Multi stage industry room thermostats with capillary system, outdoor sensor and 2 or 4 stages. For the control of temperatures in non aggressive environments in the industrial fields. 2 or 4 stages "heating or cooling" or "heating and cooling" with neutral zone. Setting ranges -15 to 55 degrees C. 24-250V.
Industrial Technology
JET range
JET-30,31 and 32. Industry room thermostats with capillary system, outdoor sensor, 2 separated setting ranges and 2 stages. For outdoor or indoor installation in non aggressive environments. JET-32 specially preadjusted for control of gutter heating systems. Setting ranges -10...45 degrees C. 24-250V.
Industrial Technology
WR range
WR 81.029-1 to 109-2. One stage capillary thermostat for supervision or control of temperatures in non-aggressive liquid or gasiform media. Especially suited for wall mounting. Dip sleeves and/or protective spirals are not included in the delivery - these include SW-200, TH and NTH. Setting ranges 0...70 degrees C. 24-250V.
Industrial Technology
JET range
JET-110X to 153F. One stage capillary thermostats for the control and supervision of temperatures in non-aggressive liquid or gasiform media. Especially suited for wall mounting. Dip sleeves and protective spirals not included - SW-200-12, TH and NTH. Setting ranges -35 to 280 degrees C. 24-250V.
Industrial Technology
JMT range
JMT-202X to 204. Multi stage thermostats with 2 stages. For the multistage control of temperatures in liquid or gasiform media e.g for the triggering of two-stage burners or coil heating systems. Dip sleeves and protective spirals are not included in the delivery - SW-200-12, TH and NTH. Setting ranges -15 to 120 degrees C. 24-250V.
Industrial Technology
LR range
LR 80.003-1 to 80.203. Rod thermostat for use as ventilation control with capillary system. Specially suited for air supply monitoring purposes in the ventilation engineering field. Protective spiral is included in the delivery. Spare spirals are SWK range. Setting ranges 0..130 degrees C. 24-250V.
Industrial Technology
KR range
KR80.003-1 to KR80.203. Rod thermostat for use as a boiler controller with capillary system. Specially suited for applications in the heating technology sphere or for use in heating reservoirs, district heating transfer stations or heat transfer installations. The dip sleeve is included in the delivery. Setting ranges 0...130 degrees C. 24-250V.
Industrial Technology
KR/LR range
KR 80.309 to 80.318 and LR 80.309 to 80.318. Rod thermostat for use as safety temperature limiter with capillary system. For the limitation of temperatures in boiler, heat reservoir and ventilating systems. Dip sleeve and protective spiral are included in the delivery. Spare THK/NTHK dip sleeves and SWK spirals available. Maximum sensor temperature up to 135 degrees C. 24-250V.
Industrial Technology
KR range
KR 85.406-2 to 85.204-8. Rod thermostat for use as boiler double controller with capillary system. Specially suited for use in the heating technology sphere in boiler systems or heat reservoir installations. Dip sleeve included - THK or NTHK. Control ranges 0...130 degrees C. 24-250V.
Industrial Technology
KR range
KR 85.311-2 to 85.315-5. Rod thermostat for use as boiler controller/safety temperature limiter with capillary system. For the limitation of temperatures in boiler, heat reservoir and ventilating systems. The dip sleeve/protective spiral is included in the delivery - THK/SWK-200. Control range 0...90 degrees C. 24-250V.
Industrial Technology
JTU range
JTU-50 to 6. Duct thermostat with capillary system. Specially suited as minimum or maximum value thermostats for air supply control purposes or for the control of fans in ventilating and air conditioning systems. Also suited as overheat protection thermostat for application with electrical coil heating systems and direct fired oil or gas air heaters. Setting ranges -25 to 140 degrees C. 24-250V.
Industrial Technology
JTL range
JTL-2 to 17NR. Air heater thermostat with capillary system and 2 or 3 functions. For use as a maximum or minimum value thermostat for air supply control purposes or for the control of fans in ventilating and air conditioning systems. Also suited as overheat protection thermostat for application with electrical coil heating systems and direct fired oil or gas air heaters. Switching capacity 24-250V.
Industrial Technology
ATR/JAT/WR ranges
ATR 83.000 to 83.101, WR 81.115-5 and 117-5 and JAT-110F, 120F and 130F. Clip on thermostats with capillary system. Specially suited for the control or supervision of temperatures at coil heating systems, pipelines, containers or reservoirs to enable the temperature-dependent driving and control of pumps or the actuation of motor valves. Control ranges -35...130 degrees C. 24-250V. Temperature fixing set ATRS-1 available.
Industrial Technology
JTF range
JTF-1 to JTF-25. Frost protection thermostats with capillary system and one or two stages. Especially suited to ensure the protection of hot water coil heating systems against freezing. Installation clips, dip sleeves and protective spirals are not included - see SW-200-12, TH-140 and NTH-140. Control range -10 to 55 degrees C, 24-250V.
Industrial Technology
JTF range
JTF-31 and 35. Frost protection thermostats which are continuous and switching. For the supervision and protection of hot water coil heating systems or heat exchangers installed in ventilation. Installation clips not included in the delivery. The bracing of capillary tubes to be done with JZ-05/6M (metal) or JZ-05/06K (plastic). Measuring range 0..15 degrees C, 30V. Also heating resistor available - JTF-H.
Industrial Technology
PTR range
PTR40.000 and 45.000. Bimetal wet room temperature thermostat/double thermostat for the control and supervision of temperatures prevailing at certain open spaces such as driveways or wet rooms and for the control of gutter heating systems. Control range -20..30 degrees C, 250V.
Industrial Technology
ETR range
ETR 78.005 and 78.006. Temperature difference thermostat with remote sensor, for the acquisition of temperature differentials between 2 independent NTC sensors. Mainly suited for use with solar heating systems for the triggering of the circulating pump. Sensors are not included, see all 5/25 sensors for type. Two sensors per device. Control ranges 0..95 degrees C, 250V.
Industrial Technology
ITR range
ITR79.402 to 78.805. Compact thermostats for installation in switch cabinets (on DIN rail) with remote sensor. For control and supervision of temperatures in halls, greenhouses and floor heating systems. Sensors not included except for ITR79.804,805 and 608. All sensors with 24 or 4 sensor types can be used. Control ranges -35..130 degrees C, 250V.
Industrial Technology
ETR range
ETR77.008-5 to 77.804-5. Universal thermostat with remote sensor. Due to different sensor designs it is universally applicable for different tasks. A red LED indicates the heating condition. Sensors not included except for ETR77.804-5. All sensor 51's can be used. Control range -50..100 degrees C, 250V.
Industrial Technology
ETR range
ETR 74.1 and 74.2. Universal thermostat with remote sensor and digital indicator (one or two stage type). For the control and supervision of temperatures in liquid or gasiform media. Suited for surface installation in humid rooms. Sensors not included. All 57 sensors can be used. Control range 0..50 degrees C, 250V.
Industrial Technology
JDI range
JDI-0 and JDI-08. Digital temperature indicator with DIN built in housing. Can be used as a thermometer if applied in combination with a remote sensor. Sensors not included. Use number 51 sensor types. Indication range -40..120 degrees C, 230V.
Industrial Technology
ITR/JDI range
ITR71.050 to 71.125 and JDI-1 and JDI-10. Digital thermostats with temperature adjustment via "turning knob" or "potentiometer" and DIN built in housing. For the control and supervision of temperatures existing in fluid or gasiform media. Sensors not included. All no. 51 sensor types can be used. Control ranges -40..125 degrees C, 250V.
Controls UK Limited