PTF/RF ranges

Room temperature sensors for surface installation with or without control elements. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in living spaces or business rooms. Green LED, max 24V. Model needed depends on the sensor number which range from PT-100 to NTC 8K/PTC 1K. Please contact the office to determine which sensor would be the correct one for your equipment.

PTF range

Room temperature sensor for surface installation for the measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in dry rooms. Green LED, max.24V. Potentiometer standard 5 ohms, rocker switch 1A. Model needed depends on the sensor number which range from PT-100 to PTFLM-P0501. Please contact the office to determine which sensor would be the correct one for you equipment.

PTF range

Room temperature sensors for surface installation for the measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in dry rooms. Green LED, max 24V, potentiometer standard 5 ohms, rotary switch 24V. Model needed depends on the sensor number which ranges from PT-100 to PTFLM-P0527. Please contact the office to determine which sensor would be the correct one for your equipment.

PTF range

Room temperature sensor for surface installation. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in dry rooms. Red and green LED, max.24V, potentiometer standard 5 ohms, rotary switch 24V. Model needed depends on the sensor numbers which range from PT-100 to PTFLM-P0537. Please contact the office to determine which sensor would be the correct one for your equipment.

PTF range

Room temperature sensor for surface installation. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in dry rooms. Green and red LED, max. 24V, potentiometer standard 5 ohms, rotary switch 24V, rocker switch 1A. Model needed depends on the sensor number which ranges from PT-100 to PTFLM-P0520. Please contact the office to determine which sensor would be the correct one for your equipment.

FUF range

Room temperature sensor for flush installation with or without control elements. For measuring temperatures, set value adjustment, presence reporting, control unit with control elements for use in living spaces and business rooms. Green LED, max. 24V. Model needed depends on the sensor number which range from PT-100 to FUFLM-0003. Please contact the office to determine which sensor would be the correct one for your equipment.

FUF range

Room temperature sensor for flush installation with out without control elements. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in living spaces and business rooms. Green LED, max. 24V, rotary switch max. 24V. Model needed depends on the sensor number which ranges from PT-100 to FUFLM-0028. Please contact the office to determine which sensor would be the correct one for your equipment.

FUF range

Room temperature sensor for flush installation with or without control elements. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in living spaces and business rooms. Green and red LED, max. 24V, potentiometer standard 5 ohms. Model needed depends on the sensor number which range from PT-100 to FUFLM-P0502. Please contact the office to determine which sensor would be the correct one for your equipment.

FUF range

Room temperature sensor for flush installation with or without control elements. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in living spaces and business rooms. Green and red LED, max.24V, potentiometer standard 5 ohms, rocker switch 1A. Model needed depends on the sensor number which range from PT-100 to FUFLM-P0509. Please contact the office to determine which sensor would be the correct one for your equipment.

FUF range

Room temperature sensor for flush installation with or without control elements. For measuring of temperatures, set value adjustment, presence reporting, control unit with control elements for use in living spaces and business rooms. Green and red LED, max. 24V, potentiometer standard 5 ohms, rocker switch 1A. Model needed depends on the sensor numbers which range from PT-100 to FUFLM-P0527. Please contact the office to determine which sensor would be the correct one for your equipment.

AF range

Outdoor temperature sensor with passive output and internal sensor. For the detection of temperatures that exist outdoors or in wet room environments, cold storages and greenhouses. The devices are specially protected against dust and humidity. Model needed depends on the sensor number which range from PT-100 to "51" PTC 1K. Please contact the office to determine which sensor would be the correct one for your equipment.

AFH/AFHM range

Outdoor temperature sensor with passive and active output. AFH has a led-through sensor sleeve, AFHM has a measuring transducer 0-10V or 4-20mA with led-through sensor sleeve. For the detection of temperatures that exist outdoors or in wet room environments, cold storages and greenhouses. The devices are specially protected against the influence of dust and humidity. Model needed depends on the sensor numbers which range from PT-100 to LM235Z. Please contact the office to determine which sensor will be correct for your equipment.

HF range

Sleeve type temperature sensor with PVC or silicone cable. For the detection of temperatures in liquid or gasiform media. Its design ensures the protection of the sleeve sensor against moisture and dust. A dip sleeve is needed when using the device in liquid media. Model needed depends on the sensor number which range from PT-100 to LM235Z. Please contact the office to determine which sensor would be the correct one for your equipment.

HF range

Sleeve type temperature sensor (remote sensor for standard devices eg ITR790. For the measuring of temperatures in liquid media after installation in a dip sleeve (TH/NTH). Also suited for the measuring of temperatures in air ducts or in non-aggressive types of gas when installed in a protective spiral such as SW-200. Model needed depends on the sensor which range from "0"(NTC2K25) to PT-1000 silicone cable 1.5m. Please contact the office to determine which sensor would be correct for your equipment.

LF range

Air temperature sensor (remote sensor for standard devices eg ITR79). For the measuring of temperatures in air ducts or non-aggressive types of gas. Installation in a protective spiral is required such as SW-200. Model needed depends on the sensor number which range from "0" (NTC2K25) to PT-1000 PE cable 1.5m. Please contact the office to determine which sensor would be the correct one for your equipment.

PF range

Room pendulum temperature sensor. For the detection of temperatures in larger rooms. Owing to its ball shape, it picks up temperatures from all directions within the room for a more representative measuring result. Model required depends on the sensor number which range from PT-100 to LM235Z. Please contact the office to determine which sensor would be the correct one for your equipment.

STF range

Room radiation temperature sensor. A double sensor that enables the detection of temperatures developed by heat radiation sources that exist within rooms. The radiation sensor is intergrated in the black hemisphere while the room temperature sensor is located in the plastic housing. The model required depends on the sensor number which ranges from NTC 2K25 to PTC 1K. Please contact the office to determine which would be the correct sensor for your equipment.

MWF range

MWFP-1000/3-cu to MWFM/4-20/6-cu. Mean temperature sensor with passive and active output. For the detection of the main temperature prevailing in gasiform media that flow in air ducts, or of the main temperature in air flows produced by coil heating systems or drying ovens. Installation clips (JZ-05/06M) and installation flange (MF) also available.

EKF range

Built in duct sensor for measuring temperatures in liquids and gases that flow in pipes, conduits, air ducts, reservoirs, tanks and containers. If for use in air, a special installation flange must be used (MF). For liquids, a nickel plated dip sleeve must be applied. Model required depends on the sensor number which ranges from PT-100 to LM 235Z. Please contact the office to determine which sensor would be the correct one for your equipment.

GFL range

Built in duct sensor with passive output. For measuring temperatures in liquids and gases that flow in pipes, air ducts, reservoirs, conduits, tanks and containers. If for use in air, a special installation flange (MF) is required. If for liquids, then a nickel plated dip sleeve is required. Dip sleeve must be 200mm. Model required depends on the sensor number which range from "0" NTC 2K25 to "51" PTC 1K. Please contact the office to determine which would be the correct sensor for your equipment.

EKGM range

Built in duct sensor with active output and measuring transducer. For measuring temperatures in liquids and gases that flow in pipes, conduits, air ducts, reservoirs, tanks and containers. If for use in air, the use of installation flange (MF) must be used. For liquids, a nickel plated dip sleeve is required. The correct model depends on the length of sensor tube and model outout. Please contact the office to determine the correct model for your requirements.

IKF1 range

Industrial built in duct sensor for measuring temperatures in liquids and gases that flow in pipes, conduits, air ducts, reservoirs, tanks and containers used in the machine apparatus and plant engineering sphere. If for use in air, the MF installation flange is required. For liquid, a nickel plated dip sleeve is required. Model required depends on the sensor number which ranges from PT-100 to LM235Z. Please contact the office to determine which sensor would be the correct one for your equipment.

IK1FM range

Industrial built in duct sensor with active output and measuring transducer. For measuring temperatures in liquids or gases that flow in pipes, conduits, air ducts, reservoirs, tanks and containers used in the machine, apparatus and plant engineering sphere. For air, the MF installation flange is required. For liquids, a nickel plated dip sleeve is required. Model needed depends on the sensor tube size and the model output. Please contact the office to determine the correct sensor for your equipment.

OF range

Surface temperature sensor for the detection of temperatures on smooth and even surfaces such as glass, heaters or radiators. The sensor holder is fixed to the surface by means of an adhesive foil. A pressure spring serves for the required contact between the sensor and the measuring point to be controlled. Model required depends on the sensor number which ranges from PT-100 to LM-235Z. Please contact the office to determine which sensor would be the correct one for your equipment.

ALF range

Clip on temperature sensor with passive and active output. For the detection of temperatures at conduits, pipes and heaters. The active clip-on sensor ALFM transduces, in a temperature-linear manner, the temperature-dependent resistance of the sensor to a voltage signal of 0-10V or a current signal of 4-20mA. The model required depends on the sensor number which range from PT-100 to "51" (PTC 1K). Please contact the office to determine which is the correct sensor for your equipment.

DF range

DF-50UGT3 to DF-7000UGT3. Differential pressure measuring transducer for the supervision of filters and the measuring of filling levels in the ventilation, air conditioning and clean room engineering sphere. Connection set JZ-06/1 also available. Output 0..10V. Measuring ranges between 0..7000Pa.

MUD range

MUD/0-10/0,16 to MUD/4-20/60. Pressure measuring transducer for the measuring of pressures that occur in non-aggressive gasiform or liquid media used in the hydraulic, pneumatic, machine plant engineering and/or process technology sphere. The stainless steel membrane is absolutely vaccuum tight.

FS range

Airflow measuring transducer for the detection of air velocities and the commutation of these variables to an electric standard signal within the range from 0-10V or 4-20mA. Specially suited for the application as a duct sensor in the refrigeration, air conditioning, ventilation engineering and process technology sphere.

RBS/ABS range

Indoor (RBS) and outdoor (ABS) outdoor motion sensor. The RBS sensor recognizes the presence of persons in office rooms, living spaces and business rooms. The ABS sensor recognizes the presence of persons and motions in outdoor areas, industrial halls or greenhouses.

RLS/KLS ranges

RLS room air and KLS duct air quality sensors. The first serves for the requirement-dependent ventilation of living spaces, offices or restaurants. It evaluates the pollution of these spaces with gases. It is not suited for the execution of a selective CO2 measurement.

RHS/AHS ranges

RHS indoor and AHS outdoor brightness sensors. The indoor sensor serves for the control of lighting installations, awnings and blinds. The device is especially suited for the supervision of light conditions in the workplace. The outdoor sensor serves the same purpose in exterior areas such as greenhouses, industry halls or storage depots. Range of application -20..70 degrees C.

AFT/ATFT ranges

Temperature and humidity measuring transducer for use in outdoor areas. Especially suited for applications in the building automation, refrigeration, air conditioning and ventilating engineering or clean room technology sphere. Ambient temperature range from -5..55 degrees C.

TF/FF/FTF ranges

FF-R2 to FTF-K1. Temperature and humidity measuring transducer (room and duct version). For the detection of temperatures (type TF), of the relative humidity (type FF) or of both temperature and humidity (type FTF). Especially suited for use within the refrigeration, air conditioning and ventilation engineering sphere. Measuring range 0..50 degrees C.